Average Reviews:
(More customer reviews)I recently purchased 2 Samsung LCD TVs, 40" for the master bedroom and 52" for the family room. Initially I was planning to purchase one articulating mount for the master bedroom and one simple titling mount for the family room. However, based on the quality of this unit, I purchased 2 articulating mounts. In addition to providing flexibility in viewing angles/positions, articulating mounts are great for the initial set-up and subsequent rewiring or replacement of components (you do not have to take off the TV; you simply pull it out and the back of the TV is easily accessible).
This unit is heavy (definitely 2-person job to mount the wall plate), solid, and made with high quality materials. Installation was pretty straight-forward. Instructions were somewhat terse (small/tiny diagrams) and not clear (e.g., which screws/bolts/spacers to use when attaching the back beams to the TV), but they were not that difficult to figure out.
Here are some recommendations:
1) Make sure that the back beams are attached to the TV at equal height. Even if you use the same holes, there is about 0.125" play when tightening the bolts. Otherwise, the TV could be not level even if the wall plate is level.
2) If you have a low margin of error for the height of the mount (I had to mount them in a built in cabinets with 1" gap on all 4 sides), attach the back beams to the TV first and measure the distace between the top of the TV and the point where the beam will "hook" on to the plate. Then figure out where to drill the holes based on the distance between the point where the beam will "hook" on to the plate and the center of openings for the screws/bolts.
3) Always measure twice and use a high quality level to make sure that the mount is level.
Click Here to see more reviews about: VideoSecu Articulating TV Wall Mount for Most 37"-55" TV, Dual Arm Extends up to 26 Inch From Wall Free HDMI cable 1VH
The VideoSecu MW370B is a full-motion wall mount for 37"-55" TVs up to 165 lbs. This articulating mount supports TV with mounting hole patterns up to 26.8" horizontally, and 18.1" vertically (VESA 680X460mm). The tilt controller allows smooth, easy adjustment to reduce glare and find the perfect angle. Full motion design allows maximum flexibility tilt, swivels up to 120 degree side-to-side and extend the flat panel screen up to 26" from the wall for perfect view positioning. Integrated cable management design on arm prevents cable pinching. This mount is VideoSecu brand. Please report to Amazon if the product you received do not bear VideoSecu logo.
Get 74% OFF
No comments:
Post a Comment